WAN - Internet Connection
RT-AX95Q supports several connection types to WAN (wide area network).These types are selected from the dropdown menu beside WAN Connection Type. The setting fields differ depending on the connection type you selected.
WAN Index
WAN Type
Configure the Ethernet WAN settings of RT-AX95Q.
Basic Config
WAN Connection Type
Automatic IP
Static IP
PPPoE
PPTP
L2TP
Enable WAN
Yes
No
Enable NAT
Yes
No
Enable UPnP
UPnP FAQ
Yes
No
Enable WAN Aggregation
Yes
No
WAN Aggregation combines two network connections to increase your WAN speed up to 2Gbps. Connect your router's WAN port and LAN 4 port to your modem's LAN ports (ensure you use two cables with the same specification).
WAN Aggregation FAQ
LAN 1
LAN 2
10G base-T
802.1Q
Enable
Yes
No
VLAN ID
( 1 ~ 4094 )
802.1P
( 0 ~ 7 )
802.1Q
Enable
Yes
No
VLAN ID
( 2 ~ 4094 )
WAN IP Setting
Get the WAN IP automatically
Yes
No
IP Address
Subnet Mask
Default Gateway
WAN DNS Setting
Connect to DNS Server automatically
Yes
No
DNS Server1
DNS Server2
DNS Privacy Protocol
None
DNS-over-TLS (DoT)
Your router's
DHCP server
is configured to provide a DNS server that's different from your router's IP address. This will prevent clients from using the DNS Privacy servers.
DNS-over-TLS Profile
Strict
Opportunistic
Preset servers
DNS-over-TLS Server List (Max Limit : 8)
Address
TLS Port
TLS Hostname
SPKI Fingerprint
Add / Delete
Account Settings
Authentication
None
802.1x MD5
Username
Password
Show password
Disconnect after time of inactivity (in seconds)
MTU
MRU
Service Name
Access Concentrator Name
Host-Uniq (Hexadecimal)
PPTP Options
Auto
No Encryption
MPPE 40
MPPE 128
Internet Detection
Disable
PPP Echo
DNS Probe
PPP Echo Interval
PPP Echo Max Failures
DNS Probe Max Failures
Additional pppd options
Special Requirement from ISP
VPN Server
Enable VPN + DHCP Connection
Yes
No
Host Name
MAC Address
DHCP query frequency
Normal Mode
Aggressive Mode
Continuous Mode
Extend the TTL value
Yes
No
Spoof LAN TTL value
Yes
No